- A complete introduction to titanium rods!2024-12-20
Titanium rod is a type of metal rod made of pure titanium or titanium alloy, with various excellent characteristics and important applications in many fields. The following is a specific introduction:...
- The performance characteristics of titanium fittings!2024-12-20
Excellent corrosion resistanceTitanium fittings perform well in various corrosive environments. This is because titanium can quickly form a dense and stable oxide film (TiO ₂) in air or oxidizing med...
- Detailed introduction about TC11 titanium tube!2024-12-20
Composition and organizational characteristicsChemical composition: The nominal composition of TC11 titanium alloy is Ti-6.5 Al-3.5Mo-1.5Zr-0.3Si, mainly containing elements such as titanium (Ti), alu...
- What is the difference between TA18 titanium alloy tube and TC4 titanium tube?2024-12-07
1. The two have different compositions, with TA18 being a nearly alpha type titanium alloy and TC4 being a (alpha+beta) type titanium alloy.2. The welding performance and cold forming performance of T...
- Introduction to Titanium Rod Specifications!2024-12-07
1、 Classification of specifications for titanium rodsThe specifications of titanium rods are divided into two categories: diameter and length. The diameter can range from 0.5 millimeters to 400 milli...
- The purpose of using coatings in titanium stamping forming!2024-11-23
Titanium plate is similar to other materials in the forming process. When necessary, coatings and lubricants are applied to certain parts of the mold on the surface of raw materials and pre formed par...
- Factors affecting metal flow during titanium material extrusion!2024-11-23
The thermal conductivity of titanium rods and titanium alloy rod blanks is low, which can cause a significant temperature difference between the surface and inner layers during hot extrusion. When the...
- Forging of titanium and titanium alloys!2024-11-08
Most titanium and titanium alloys require various forms of pressure processing such as forging, rolling, extrusion, forging, and stamping, among which forging and stamping are more commonly used in me...
- Heat treatment process - annealing2024-11-08
Annealing is a metal heat treatment process that refers to slowly heating a metal to a certain temperature, holding it for a sufficient time, and then cooling it at an appropriate rate.The purpose of ...
- Introduction to the Characteristics of Titanium in "Environmentally Friendly Metals"2024-11-08
Titanium metal has many excellent properties: its specific gravity is 4.5g/cm3, which is only 56% of that of ordinary structural steel, while its strength is equivalent to or higher than that of ordin...
